Registered, not licensed in the usual sense
Washington's own leaflet for homeowners says it without hedging: the state does not require contractors to pass a competency or skills test to become registered, though L&I does test and license electricians and plumbers (L&I publication F625-084-000). Anyone who does work that adds to or subtracts from real estate, consults on a construction project or flips houses has to register. Gutter cleaning, lawn care and window washing are outside the requirement.
What registration does require is set out on L&I's registration page:
| General contractor | Specialty contractor | |
|---|---|---|
| Surety bond | $30,000 | $15,000 |
| Liability insurance | $200,000 public liability and $50,000 property damage, or $250,000 combined single limit | |
| Application or renewal fee | $150.20 | |
| Scope | Most types of construction work; may hire subcontractors in several specialties | Only the registered specialty; may not hire subcontractors |
The higher bond figures apply to any contractor whose renewal date is July 1, 2024 or later. The general versus specialty line matters when you hire. Someone registered as a painting specialty contractor cannot legally run your kitchen remodel and sub out the plumbing.
What our Washington listings show, and what they cannot
The L&I general license file gives the business name, license number, business structure, mailing city, the date the license took effect and the date it expires. It does not carry the bond or insurance details for each contractor, so our Washington pages have no bond column. Those details are on L&I Verify, along with the workers' comp account, past infractions and any lawsuits filed against the bond. Look there on the day you hire, as L&I advises.
One quirk of the file: a business that re-registers appears under a new license number. About 2,900 of the active registrations share a state business identifier with an older record marked as re-licensed, so a firm that has traded for years can show a recent effective date. The date orders our lists because it is the only tenure measure the register offers. Read it as a floor, not a biography.
The disclosure statement
For a residential job of $1,000 or more on a building of four or fewer units, the contractor must give you a disclosure statement before work starts (RCW 18.27.114). It states the registration number, the bond amount and the registration's expiry date. Then it warns you, in the statute's own terms, of three things: the bond may not be enough to cover a claim arising from your job; it is shared with other customers, suppliers, subcontractors and taxing authorities; and your property can be liened by unpaid suppliers and subcontractors, so that you could pay twice.
You sign it to acknowledge receipt. The contractor must keep the signed copy for three years. A contractor who cannot prove you received the statement cannot bring a lien claim on that contract, which gives a careful contractor every reason to hand it over. If nobody has given you one by the time the crew arrives, ask for it.
Suing on the bond
In Washington the route to the bond is a lawsuit. L&I's role, after it passes the papers on, is that of record keeper. The procedure from its filing a suit page runs like this:
- Complete a summons and complaint naming the contractor and the bonding company, with the bond number and registration number. L&I does not supply the forms.
- File in the superior court of the county where the work was done. The filing fee is about $200.
- Serve the bond by mailing three copies to L&I's contractor registration section by certified or registered mail, with a $66.20 processing fee. L&I then serves the contractor and the bonding company.
- When the case ends, the winning party sends the judgment or settlement to L&I within 10 days.
The clock is in the statute. A residential homeowner suing for breach of contract has two years from the date the work was substantially completed or abandoned, whichever came first. Other claimants have one year (RCW 18.27.040).
The same section sets the order in which a short bond is paid out: employee labor first, then breach-of-contract claims by a party to the construction contract, then registered subcontractors and suppliers, then state taxes, then court costs and attorney fees. There is one provision in the homeowner's favor. Claimants other than a residential homeowner cannot together take more than half the bond, which on an unimpaired $30,000 bond keeps $15,000 out of their reach.
The Homeowner Recovery Fund
For judgments ordered after July 1, 2026 there is a backstop. L&I's Homeowner Recovery Fund can pay up to $25,000, depending on available funds, to a homeowner who has a final superior court judgment against a contractor that was registered when the work was done. The conditions are specific:
- You own and occupy the home.
- It is a single-family house or a building of four or fewer units. Condominiums are excluded.
- You apply within 90 days after the court case ends, with a certified copy of the judgment and proof of residency.
- If approved, you sign your judgment rights over to L&I before payment.
If the fund is short, applicants are placed on a waitlist and paid in order. Note the condition that matters most: the contractor must have been registered. Hire someone off the register and both the bond and the fund are closed to you.
What to do with this
Verify the registration the week you sign. Get the disclosure statement. Keep your contract, change orders and proof of payment in one folder, because a suit on the bond is won on paper. And mark the two-year date in your calendar the day the job is finished.
Questions clients ask
Do Washington contractors have to pass a test?
General and specialty construction contractors do not. L&I states that Washington does not require a competency or skills test for contractor registration. Electricians and plumbers are tested and licensed separately.
How long do I have to sue a Washington contractor's bond?
A residential homeowner has two years from the date the work was substantially completed or abandoned, whichever came first, under RCW 18.27.040. The suit is filed in superior court in the county where the work was done.
What is the Washington Homeowner Recovery Fund?
An L&I fund that can pay up to $25,000 to an owner-occupier who holds a final superior court judgment, ordered after July 1, 2026, against a contractor that was registered when the work was done. Applications are due within 90 days after the court case ends.
Sources
- Washington State Department of Labor & Industries: What You Should Know About Hiring a Contractor, Remodeler, or Handyman (F625-084-000)
- Washington State Department of Labor & Industries: Register as a contractor
- Washington State Department of Labor & Industries: Verify a contractor, tradesperson or business
- Revised Code of Washington 18.27.114: Disclosure statement required
- Washington State Department of Labor & Industries: Filing a suit against a contractor
- Revised Code of Washington 18.27.040: Contractor bond, actions against the bond
- Washington State Department of Labor & Industries: Homeowner Recovery Fund